Ring offers access to a timeline-style feature where you can view events going back six months (if you are subscribed). From the timeline, you can sort through ring events, motion events, starred events, or live view events. From the web app, you can also sort by device so that you can separate your Spotlight Cam footage from footage captured by your other devices. Right now, the feature isn’t very advanced. Soon, Ring plans to completely revamp their mobile app.
My wife and I plan to hire a nurse at night for our new baby, but due to the many stories we’ve heard, we want to set up a camera (indoor of course) to surveil her and check up on her at any given time. (we will let her know she’s on camera – it will not be a secret at all.) I read your article but I still want your advice because I’m unsure. Which camera do you suggest for me? The main qualities I need is:
Please be advised that ring products record streaming only for 2 months then they charge you 30 dollars per device. ..so really not worth it…they do not mention that on sale…to be fair the video quality is very good but battery is not as they say…easy to install but not worth it as a system ..you can’t link it to smart home systems and it does shut off a even before it gets to -20 degrees. ..was a disappointment
On another note, I really like this article. It has a lot of good information that I’ve added to my personal research. One thing I like about Abode is that the Chris Carney (a founder) has many years of experience in the security industry. It is open source and seems like it protects user data better. After Google purchased Nest, one can only imagine how they are combining all of that personal data with all of the other personal data they have on us. The on-demand monitoring seems really valuable–I only really need 3rd party monitoring when I’m out of town.
Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
I haven’t had that problem, and as you said, I’m running it hardwired. My clips include a front facing image of guests. That said, I’ve recently had issues with wake up times when I’m away from home. As an example, I answered a ring alert yesterday, but it just kept spinning. I had to hard close the app, open it back up, and then check the alert. By then, the guest was gone.
Once the base station is online and your account set up for monitoring, the rest of the devices in your starter kit are automatically identified in the Ring app and you can set them up one by one. With each one, you can provide a name and room location to help identify the accessories in notifications and the app. With the keypad, you'll set up an access code that lets you arm and disarm the alarm, and you can set up different codes for different people. As you set up each motion detector and contact sensor, the app will have you test each one to ensure that they're probably detecting events.
Since I’m assuming you will want to live stream often to check on your kids, I would recommend a wired security camera. The original Canary is a good option as is Arlo Q. Both will allow you to live stream from anywhere. Original Canary does not offer two-way audio for free, Arlo Q does, something to consider if you want to be able to talk to your childcare provider or children using the camera. Both cameras include free cloud storage.
The original Ring has a battery option. I don’t know how I would feel about that because you do have to remove the doorbell to charge it. Ring claims it will last 6-12 months on a charge. If that’s true, that wouldn’t be so bad; however, I would expect it to last like 3-6 months. In my experience, when a company gives a top end battery life range, that’s how long it will last if you never use the device. All that said, I don’t know how hard it would be to move a wired doorbell to the front of your door.
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
A Canary Membership provides 30 days of video history, full-length video clips, social sharing, custom Home mode, two-way audio, desktop streaming, and unlimited downloads for $9.99/month for up to five cameras. It also provides access to a Safety Buton feature backed by Noonlight, formally SafeTrek. If you have more than five cameras, Canary charges an additional $4.99 per camera per month. You can use an unlimited number of cameras in a single location with a Canary Membership.
The new Stick Up Cams, both the wired and battery-powered versions, are weatherproof and capable of going outside, according to Ring. But, unlike their predecessor, they're also fully equipped to go inside your home. In fact, Ring wants you to put them inside. The home security cameras have all of the basic features you'd expect, including 1080p HD live streaming, motion detection, activity zones, night vision and two-way audio.
While having a couple of power/connection options already provides flexibility, there is even more flexibility thanks to accessories (sold separately). The first accessory is a Secure Mount that locks your device into place. Replacing the magnetic base, it helps prevent device theft. The second is the Stake Mount: Stick the mount into the ground or a potted plant to give Flex a hidden camera effect. Third is the Twist Mount, which can bend and wrap around an object so that you can hang it virtually anywhere. Canary suggests using it to place Flex on fixtures, railings, or even branches.
I’ve had 2 Arlo Pro cams for a few months now. They both work very well, although the false motion trips by wind or in my case a train that comes by is a bit annoying. But what I have found is that I really want a camera that is on 24/7, that I can go back and scan thru in case there’s an issue. The other thing is the delay. I had a person enter my property and the Arlo caught him just as he was almost out of the camera. A friend of mine told me to check out a FLIR camera. I don’t have a good home security system, so I would like to have something that can expand as far as needed. I can always take my Arlo to my office and use it there if I decide to switch.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
The system was quite easy to install. Having six sensors to place seems like a lot, until you realize you can’t cover everything though you can certainly cover enough. I found the system to be very responsive whenever it was armed or a sensor was set off (both the app and e-mail notifications were received mere seconds after an event). This is in marked contrast to a non-Ring security camera I use to monitor the entrance that can take several minutes or longer to send me notifications. The siren too was fairly loud, as I found out one early weekend during testing.
I haven’t had any issues with Arlo Pro, but I called their support team to get a feel for support quality. As Netgear owns Arlo, phone tech support is managed by Netgear, and they offer offshore support. It was the stereotypical experience you think of when you think of tech support. I called into a phone queue, waited a little bit (not long), got transferred to someone who struggled to understand my question, she put me on hold, she came back to clarify my question, she put me on hold, and then she came back with an answer. While it wasn’t a bad experience, it was sub-par compared to the tech support experiences provided by Nest, Canary, and Ring.
With the base station up and running, I was able to verify the address associated with my Ring account, enter my closest cross street to assist emergency responders, and add emergency contacts to be notified if the alarm trips. Adding a verbal password to authenticate my account when Ring calls due to an alarm event was the last step, and I was good to go with the 30-day free trial of professional monitoring. After the free trial, professional monitoring costs $10 per month or $100 per year, and it also includes cloud video storage for any other Ring camera and doorbell products you have in your home.
Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
What sets Nest Guard apart from the abode and Ring’s base station is its intuitive nature. First of all, the integrated keypad is a smart choice because let’s face it; phones get lost. In addition to a keypad which accepts a numeric passcode, Guard has several buttons. You can press a button to quickly swap between modes (alarm off, home and guarding, and away and guarding) or you can press for immediate help using the panic button which is found on the back of the device.
So what happens if an Alarm is triggered? If an event is detected, you will get an email and an instant push notification to your phone which you can swipe to open the Nest App. From the Nest App, you can see which sensor triggered the alarm, and you will be presented with two options: call the police or turn the alarm off. If you have a Nest Cam, you will be able to view footage from the event simultaneously. If you have multiple Nest Cams, you can swipe through to a view a live feed from all of your cameras. If you’re subscribed to Nest Aware, the Sightline feature will bookmark the event so next time you access your camera’s timeline, you’ll see a red bar. Tap on the red bar to review the footage of the event. Of course, while all of this is happening, your siren will sound.
In addition to sharing camera access, having multiple users will make geofencing even more intelligent. The cameras will arm when everyone is away and disarm when at least one person is home. You can also see who is home and who is away using the mobile app and set up Presence notifications to alert you of the same. Finally, it brings everyone in on the action. If an event is detected, an alert will be sent to all users. If one user responds to the alert, other users will be able to see how that person responded. You can also leave a comment on the event and chat with other users directly within the app.
Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
The picture isn’t quite as rosy if you’re also looking for a full-fledged smart home system. Ring Alarm is positively capable of being a great smart home controller. But it’s not that today. And to be fair, Ring isn’t promising that it ever will be—at least not officially. But they wouldn’t have built in Z-Wave, ZigBee, and whatever that third mystery radio is if they didn’t intend to go down that path.
Ring offers a wide variety of doorbell and exterior security lighting features that range in price from $99.99 to $499.00, as well as plenty of accessories for them that range in price from $10.00 to $49.00. These accessories include options such as a solar panel, ring chime, quick release battery pack and more. And, they have two monthly video recording packages that range from $3.00 per month ($30 annually) to $10.00 per month ($100 annually). These video recording packages automatically renew to ensure you are always protected.