The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
In 2019, Arlo plans to launch Arlo Ultra. Ultra will join Pro 2 as a flagship product. There are several differences between Pro 2 and Ultra including resolution. Ultra will offer a 4K resolution, a new base station, built-in siren, integrated spotlight which supports colored night vision, and an upgraded design. Ultra is still wire-free and weather-resistant, but the mount was redesigned, the battery was redesigned, and it ships with a weather-resistant, magnetic charging cable. I will be sure to provide more details ASAP.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Regardless of whether you go the adhesive or hardware route, Ring provides everything you need right in the box, with installation kits for each component of the system conveniently boxed and labeled to make it easy to find what you need. All you'll need if you want to use the included screws and anchors for hardware mounting are a screwdriver and a drill.
So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.
What happens if your home Wi-Fi goes out? Luckily, both the Ring and Nest systems offer cellular connectivity, so your alarm will stay online even if there’s a power outage or your Wi-Fi disconnects. Nest charges an additional $5 per month or $50 per year for cellular connectivity, while Ring offers the feature when you purchase the Protect Plus plan. Both systems also incorporate battery backup. While the Nest device will continue running for 12 hours without an external power source, the Ring will last for 24 hours.
After testing indoor Nest IQ Indoor and Nest Cam Outdoor, I’ve decided to pass on Nest IQ Outdoor. Plus, it sounds like this version will require drilling, and I’ve found that Nest’s facial recognition feature doesn’t add more value than their face detection feature. I also don’t have a place for Ring Floodlight. However, I will buy Ring Spotlight. I have six devices in my office waiting to test, so I can’t promise that it’s going to happen quickly, but it will happen! 🙂
Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.
Ring sells a range of home security devices, from its Ring Video Doorbell Pro to the Ring Alarm Security Kit. It even has a last-gen version of the Stick Up Cam I tested back in 2016. While you could technically put the older Stick Up Cam inside your house, it was designed to go outside your home. It even had an optional solar panel accessory to provide power sans cable.
The Spotlight Cam employs the common method of using bounding boxes over the camera image to define detection zones, but you can use the box handles to twist it into any kind of geometric shape, not just squares. That allows you to work around outdoor areas where you don’t have as much control over the environment as you do inside your home. There’s also a scheduling option to disable motion alerts during certain times of day.
abode also sells their own line of cameras. They sell an image sensor, which will take three snapshots if it detects motion, and two streaming cameras. I’ve tested two of the three. The two cameras I tested were unfortunately unimpressive, and I found Nest cameras to be vastly superior. abode’s newest camera, not tested, offers two major benefits: FHD 1080P resolution and two-way audio. Of course, there’s also abode iota which offers the same camera specs as the newest abode streaming camera. The benefit of using abode cameras over Nest cameras is free cloud and local storage. abode’s streaming cameras support a microSD card and include three days of free cloud storage. Nest supplies just 3 hours of snapshot storage for free. As described above, if you want more Nest storage, you will need to pay for Nest Aware.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Rose first let me say thanks for the reviews. But just wanted to let you know (and maybe the nest guy you talked with also) that you can choose to only get notifications for people and not motion. This has been available for at least 3 months now. Also have only had one time when it had reported a person and was not. Car lights was what it really saw.