If that’s not possible, or if the floodlight feature is really important to you, I recommend either the Ring Floodlight (not tested but I have heard good things about it) or Ring Spotlight. Ring launched a new indoor camera at CES, so that might be an option. I need to dig into it more before I say yay or nay of course. Currently, Nest, Arlo Q, Arlo Pro, and Amazon Cloud Cam are my top recommended indoor cameras.
Finally, you can add third-party Z-Wave and Zigbee devices. abode has a list of compatible devices on their site. The list includes products by Aeon, Aeotec, Enerwave, Fibraro, First Alert, FortrezZ, GE, Linear, Kwikset, Leviton, Schlage, Iris, Sensative, ZooZ, and Netvox. abode also sells their own Home Automation Power Outlet & ZigBee Extender. The device will turn any outlet into a smart outlet, allowing you to control plugged-in devices and include them as part of your automation recipes. The switch also acts as a ZigBee range extender.
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
The other major part of the Ring Alarm kit is the 5.9 x 3.9 x 0.9-inch keypad, which can also be laid flat or hung on the wall. The keypad has 12 backlit number buttons, as well as three other buttons for quickly arming and disarming the system (though it's also possible to do so from the Ring app for iOS and Android). The buttons are plastic and easy to clean, and by default, they chime when pressed. I like that the keypad is handheld, but I still much prefer the rubberized remote keypad offered by SimpliSafe.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
As a Contributing Editor for PCMag, John Delaney has been testing and reviewing monitors, TVs, PCs, networking and smart home gear, and other assorted hardware and peripherals for almost 20 years. A 13-year veteran of PC Magazine's Labs (most recently as Director of Operations), John was responsible for the recruitment, training and management of t... See Full Bio
The device’s design causes another issue. In theory, each clip cable needs to be screwed in. I’ve heard others claim this is for security reasons, making the device harder to steal. But I don’t see how this could be true. It’s not hard to walk up and unscrew the camera from the cord and walk away with it. The camera attaches to the base using a magnet, and it connects to the power adapter using a cord that you simply push and twist to disconnect.
When you say “full coverage” I’m assuming you mean continuous recording, is that right? Arlo and Nest can record continuously, but only if they are plugged in. Also, the outdoor power cord for Arlo is new and it’s on a pretty long lead time right now. It’s sold separately from the camera. If you could confirm that your new is continuous recording, I’ll dig in a little more, but I don’t want to assume anything before making a recommendation.
I had a question as I am looking for a camera system to use for my outdoors. I have blink for inside and am plenty happy with it, but want something better for outside. I really wanted to go with Ring, but was disappointed with the integration available. Then I looked closer and from what I understand there is no way to turn off recording. Is that correct? That is fine maybe for the front of my house, but who is going to want a system in their home or in their backyard that they can not stop recording. This leads into serious issues about privacy to me.
Think of Smart Alerts as the ability to control alert frequency. You can request to receive more alerts, “standard,” or “light” (fewer alerts) or choose to turn notifications off from the app’s main screen. You can also snooze motion alerts for a set period of time. Once snoozed, you won’t receive motion alerts, but motion events will continue to upload to the cloud. Besides snoozing motion, you can also snooze your Ring Chime or your Chime Pro.
And that is its job, to keep the camera charged. However, I noticed during testing that it does charge the battery too. When I installed the camera, the battery level was at 40%. Soon after connecting the solar panel, that percentage jumped to 50%. The next day it rained, and the percentage climbed from 50 to 52%. Day three was overcast, and yet the battery level crept up to 56%. Day 4 was a beautiful sunny day, and the battery level jumped to 78%. By the end of day 4, I was at 100%.
Meet Oco next generation Full HD Home Monitoring Meet Oco next generation Full HD Home Monitoring Camera with SD Card and Cloud Storage. Monitor everything you care about: your home children pets elderly parents business etc. Setup Oco2 in less than 60 seconds and access Full HD video remotely with our App. No Monthly Fees required to activate ... More + Product Details Close