For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.

It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.
Blink is also a battery-powered outdoor camera. It’s built around a unique chip that should provide an amazing battery life. However, while my indoor cameras are almost at the two-year mark using the original AA batteries, my Blink XT batteries usually last between 1.5 and 2 months. While I love my Blink indoor cameras, I would not recommend Blink for outdoor use. You can read my Blink XT review and comparison to Arlo Pro here.
Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
Hi Rose, AMAZING review! I’ve been struggling with the decision making process with all the options out there. I had purchased an Arlo indoor camera a year ago and faced it out the window but got glare that blocked the view outside occasionally as the sun moved throughout the day. You said you turned off night vision when facing camera out the window but did you have any glare issues or ideas on how to resolve? (perhaps the newer models are better now) I returned the Arlo because if this but need to buy something and would consider Arlo for other benefits if glare can be reduced. I’m concerned about short battery life due to cold winter temps (Colorado) but I love the idea of solar option on the Arlo Pro outdoor. Advice?
There is a problem with the Alexa skill if it requires the user to say “(whispers) Alexa, show me the front door” when someone is at the front door. As is, without Alexa – people already try to hide, turn the lights off, etc. – lol. “ALEXA!!! SHOW ME WHO IS AT THE FRONT DOOR. OH THAT PERSON I DO NOT WANT TO OPEN IT, I DO NOT LIKE THAT PERSON THEY ARE NOT HOLDING PIZZA! SO I WILL NOT OPEN IT. I HOPE THEY DID NOT HEAR ME.”
The Ring Alarm is equipped with the hardware to serve as a smart hub, though it's not quite there yet. While the base station contains both ZigBee and Z-Wave radios, only the latter is user- accessible, and any noncertified third-party devices that are paired won't trigger the alarm. You can pair Z-Wave products through the Ring app, but they'll only use the base station as a bridge.

The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
At this point you have to verify your address if you choose to sign up for professional home monitoring, otherwise, just agree to the Terms of Service to continue. The next screen gives you the option of adding the included devices, all of which are pre-paired. I removed the battery tape from the contact sensor and it was added immediately. Here you can choose how the device will be used (door, window), give it a name, and assign it to a room (or choose No Room Assigned). I used the double-sided tape to install the sensor on a window, tested it, and moved on to the keypad.
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
The Alarm system performed flawlessly. The base station chimed whenever a sensor was triggered while in Disarmed mode, and the event was added to my history log within seconds of the event. I promptly received push and email notifications whenever there was a mode change or when the base station was unplugged and switched to the cellular network while running on battery power. However, the Alarm system does not send push or email notifications when a sensor is triggered while in disarmed mode like the Vivint Smart Home system does. This may not seem like a big deal, but it's nice to know when windows and doors are being opened if you're away while other family members are home with the system disarmed.

Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
I’m trying to set my mom up with a constant live feed of their front door. I bought a cloud cam and echo show, before realizing their house isn’t set up to get much of a front door view from the inside. Think a hard wired ring pro with echo show always displaying the live feed would work, or drain the rings battery even though it’s hard wired? Any other ideas? I’d like to keep the echo show, but will probably return the cloud cam.
We set up the base station in our office, the contact sensor on the front door, the keypad on the front table, the motion detector in the hallway, and the range extender in our laundry room. You can add additional motion sensors and contact sensors to the system for additional coverage. We added a couple of sensors to windows on the first floor of our home for added security.
My gate is too far from my router so I would prefer to hardwire the doorbell. I would rather not use an extender. I ran CAT5 when I installed my old doorbell (which is now outdated and does not have software to use on my iphone). Is my only option the Ring Elite? I have the Arlo set up indoor, but I was not sure if Arlo was going to make a doorbell. Any thoughts?
Ring is finally getting ready to release its full home security system — an alarm, keypad, and array of sensors that monitor a house while you’re asleep or away. The product, called Ring Alarm, was initially announced (and supposed to come out) last October. But after a lawsuit, a lengthy delay, and a rebranding, Ring says it’s now just about ready. Sales for the security system start today, and the product is supposed to begin shipping next month.
For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.

The keypad measures 0.91 by 5.87 by 3.94 inches (HWD) and has numeric keypad buttons (0-9). It also has an X button and a button with a check mark on it: pressing and holding both of these buttons puts the system into Panic mode, which sounds the siren and sends an alert to the professional monitoring service so that police can be dispatched. To the right of the numeric keypad is a round dial with three buttons for putting the system in Home, Away, and Disarm mode, but you'll first have to enter your unique access code. Other LEDs include network and battery indicators, and a faulted sensor LED that tells you if a sensor is open before you arm the system.
For all the things that the Ring Alarm system does well, there are still some areas in which it can be improved. One of my biggest annoyances with the system is that there is an audible alert for when a contact sensor is opened, but there is no alert for when it's closed. I have a sensor on each of the three doors that lead into my house and while it's great to hear a noise that they've been opened, it would be awesome to hear a confirmation that they've been closed as well.
Installing Spotlight Cam Solar wasn’t that simple, which I expected since it requires drilling, but the process was made even more complicated by two issues. First, the box design would have Steve Jobs rolling over in his grave. In fact, I’m not one for exaggerations so know that when I say it’s one of the worst box designs I’ve ever opened, I mean it. On a more serious note, there’s a discrepancy between the instructions found on the app, those printed on the included quick start guide, and those found online.
Multi-Camera Discount Price Includes Shared Storage for 10 Cameras (Free Plan Supports 5.) Price Includes Shared Storage for 10 Cameras (Free Plan Supports 5.) $10/month or $100/year for Unlimited Ring Cameras $10/month or $100/year for Unlimited Ring Cameras Each Additional Camera Costs $2.50/month or $25/year Price Includes Shared Storage for 5 Cameras (Free Plan Supports 4)
System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.

Ring's updated app (which will roll out to everyone in the coming weeks) brings lots of improvements for those invested in the ecosystem. You have quick and easy access from the main screen to the alarm features, as well as a glimpse of what your cameras are seeing. Things can be a little slow to load, depending how much equipment you have, but most of the time it works great.


The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.

Hi Rose, I’m intrigued that you have a traditional alarm system but also one of these new wireless versions. Are they integrated? Can they be? I haven’t looked at the Ring, abode, and Nest systems because I have am old-fashioned standard system that came wired into my home. I’d love to integrate it with my Ring cameras and doorbell cam, or even get one of the new wireless voice-activated bases or keypads. Can that be done with any system today?

Add an extra layer of security to any home with the versatile and wire-free Stick Up Cam. Stick Up Cam mounts to any surface and sends you instant mobile alerts as soon as it detects motion. When you answer the alert, you can see, hear and speak to people on your property from your smart phone, tablet and PC. With adjustable motion sensors, Stick Up Cam lets you focus on the most important areas of your home. It comes with all the tools you need to get it setup in just minutes. And with a free 30-day trial of Ring Video Recording, you can review, save and share all your Ring videos at anytime, with anyone.
×