Like most security systems, Ring Alarm has two armed modes: Home activates the door/window sensors, but leaves the motion sensor turned off. This allows you to walk around inside your secured home without triggering the alarm. Away mode arms all the sensors, so if intruders break in through an entry point that isn’t protected by a sensor, the motion sensor will trigger the alarm when they walk within its range. One motion sensor can do the work of many door/window sensors.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
Hey- just happen to be reading this, and full disclosure I’m one of the canary founders. Our battery is designed to sub – temperatures and i had mine sitting under snow and it still worked (though video was white as it was… well… under the snow). We say it goes to -4 degrees F (-20C). But yea, the battery won’t last as long in that cold, but you can keep it plugged in, or just charge it overnight to get it back up and running. Cheers, Adam
Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
I got my new Ring security system yesterday and installed the panel, door sensor, and motion sensor yesterday. I have had a security system with a major national monitoring company for nearly six years. I am not new to this. I got the new Ring system to replace the current system I have due to the price of the monitoring. I like the idea of having $10 a month for all of my cameras and security system combined. By switching, I am able to save $55 a month by cancelling my previous monitoring from the companies that did so for my security system and cameras.
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
An update on the outdoor charger for the Arlo Pro/Pro 2: Amazon has been informing buyers that “NETGEAR has informed us that the product Arlo Outdoor Power Adapters (Model No. VMA4700) may have an issue with the connection between the adapter and Arlo Pro cameras may allow water to enter the camera.” This can result in the camera short-circuiting, overheating, and burning. (It’s hard to find out about this, and Netgear has failed to issue a recall.)
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.
I’ve enjoyed reading your summaries for over a year. I initially had my mind set on Abode after removing iSmartAlarm and SimpliSafe (previous generation) from consideration. I had an Abode package all set and nearly pulled the trigger on a purchase. However, after coming across Ring and reading your review multiple times, I ultimately went with Ring. What won me over was the package being offered by Costco that has six door/window sensors. When I priced out what Abode would cost to have comparable coverage, Ring clearly won out. I don’t need any integrations or automation, thus I don’t feel I’m losing out on those aspects by selecting Ring over Abode.
The Ring Alarm is equipped with the hardware to serve as a smart hub, though it's not quite there yet. While the base station contains both ZigBee and Z-Wave radios, only the latter is user- accessible, and any noncertified third-party devices that are paired won't trigger the alarm. You can pair Z-Wave products through the Ring app, but they'll only use the base station as a bridge.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward. I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
Even so, it would be pretty easy to get all alarmist about Ring's security. But, the Internet of Things is full of connected devices -- Wi-Fi-enabled or otherwise -- that also have some degree of hackability. We've seen it in everything from security cameras to locks and more. A good rule of thumb to help protect yourself, and this applies to products in any tech category, is to check often to make sure your software is current.
Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
Well, not long after the training mode came to an end, I made a bonehead mistake. I forgot to get my girlfriend set up with the App and when she came over when I wasn’t home, the alarm went off. Unfortunately, I was not able to cancel her mistake due to me fumbling with a rather clunky app interface on my phone. Luckily the Ring representative from the monitoring team called very quickly and I was able to avoid a cop showing up and a possible charge$$. My interaction with the Ring rep was fantastic. They called very quickly and the person I spoke with was extremely professional, kind and knowledgeable! They made me feel like a valued customer for sure.
Thinking of battery-powered original Ring, I don’t think opening up the mount and recharging a battery every 3-6 months would faze me. Having two doorbells (the “real” one on the side and the Ring on the door frame) probably would bug me more than a little. It did not occur to me to move the existing doorbell, just to install the Ring in the new location on or near the door.
Biggest problem though is the ‘wake up’ time. You reported on it, but I didn’t really take the time to really consider, “Hey, if I want to catch the kids driving by banging mailboxes, by the time they drive by and the camera wakes up, they’re gone!’ Well, that’s just what I learned as I set everything up, had the ap working and started getting notifications when people drove by. I thought AWESOME! it works! Well, not so much. Unfortunately, the car is never seen on the video, so the purpose is pretty much defeated.
I can see why you’re confused because really any of these three options will do everything you want and more. Is it important to you that your security system and camera use the same app? If so, maybe eliminate abode from the list. You can use the outdoor Nest Camera with abode, but it isn’t a great experience. If you want an outdoor camera that can record continuously and not just based on motion, that would be Nest Cam. If you don’t mind if the camera only records events and as you said, want a system without “big monthly charges,” Ring is probably the best choice for you. They recently launched an indoor camera, you could then add a video doorbell (ideal) or one of their outdoor cameras to your porch. You will need five contact sensors in total. Ring Alarm will include a mobile app for you to review footage and you can expand the system down the road if needed. As it just launched and based on Ring’s history of product support, the chances that it will be outdated soon are very slim.
Other Devices Image Sensor, Smart Switch, Extra Siren, Temperature, Humidity & Light Sensor, Water Leak Sensor, iota Smart Doorbell, Range Extender, Smart Deadbolt Lock (Nest x Yale) Video Doorbell (Pro, Elite, 2), Spotlight Cam, Floodlight Cam, Stick Up Cam, Chime, Chime Pro, Solar Panel, Solar Sign, Ring Beams, Smoke & CO Listener, First Alert Smoke/CO Alarm, Flood and Freeze Sensor, Third-Party Z-Wave Locks Satellite Siren, Smart Switch, Yard Sign
You can set motion zones for the lights, too. In this case, the app shows a graphic representation off the motion sensor’s 270-degree range, and you can define where you want movement to turn on the lights by tapping up to three preset zones and then expanding or reducing coverage in those zones using a slider. Depending on your settings, the light will stay on for one to 15 minutes.
Unfortunately, Ring doesn’t currently, nor does it appear to be adding any type of home automation features, but it is compatible with many third-party smart home services. Although Ring doesn’t offer professional monitoring services, they do offer live streaming when hardwired to your existing doorbells power supply. Ring Live View does not work when using the internal battery. Since most users prefer to use the Ring internal battery, paying for one of the Ring video recording packages is the ideal option.