Arlo Smart also adds the ability to use Activity Zones even when your cameras are unplugged; however, if you choose to keep your Arlo Pro 2 indoors and plugged-in, you will have Activity Zones for free. Either way, you can select up to three zones for Arlo to monitor. If activity is detected in one of your zones, you’ll receive an alert. Activity that occurs outside of your set zone will be ignored.
Thanks, Abe. I have a chart that compares Canary and Flex here: https://homealarmreport.com/canary-flex-security-camera-review/. I still prefer Canary All-in-One over Flex. Of course, it’s an indoor only camera so that might be a dealbreaker for you depending on how you want to use it. It has a better picture, already offers two-way audio (if you’re a Canary Member), has motion zones, and multiple air quality sensors.
Both systems offer exceptional protection and support, so the choice really comes down to your unique needs. For someone who wants their home to be fully automated and for their devices to talk to one another, Nest is the easy choice. While more expensive, the system offers excellent connectivity and added products like the Nest Tags and connected lock.
Arlo Pro can be used outdoors only if running on battery or solar power. (While they once sold an outdoor power adapter, it is no longer available due to quality issues.) If you’re using battery power, you will have to charge your camera indoors as the included power adapter is not rated for outdoor use. Furthermore, if your battery is too cold from being outside, you might have to wait for it to warm up before you can begin to charge it. If you don’t like the sound of that, you can invest in the $59.99 Pro Charging Station and an additional rechargeable battery ($49.99). You can use the charging station to charge two batteries simultaneously so that you always have one ready to go when needed. You can also purchase the Arlo Pro UV-resistant silicone skins, which provide added protection against condensation and sun glare.

You set up the Chime Pro, which also adds a chime sound to your motion detection alerts, in a process that’s similar to the camera installation: You plug it in to an AC outlet somewhere between your router and the camera to repeat the wireless signal. I used a spare outlet in my kitchen as that was roughly the halfway point between my living room router and the camera on the front of my house. Once the Chime Pro is plugged in, a voice prompt will tell you it’s ready to set up. You then add the device in the Ring app then follow the voice and app prompts to connect it to your wireless network.


One final issue has more to do with software performance than hardware issues, but it’s important to point out. From time-to-time, the snapshot will record a little too late. In the example above, it caught the UPS man’s back. For those without a Nest Aware subscription, this is all you get. Those with a subscription can rewind footage to see the moments before the clip.
Arlo Pro can be used outdoors only if running on battery or solar power. (While they once sold an outdoor power adapter, it is no longer available due to quality issues.) If you’re using battery power, you will have to charge your camera indoors as the included power adapter is not rated for outdoor use. Furthermore, if your battery is too cold from being outside, you might have to wait for it to warm up before you can begin to charge it. If you don’t like the sound of that, you can invest in the $59.99 Pro Charging Station and an additional rechargeable battery ($49.99). You can use the charging station to charge two batteries simultaneously so that you always have one ready to go when needed. You can also purchase the Arlo Pro UV-resistant silicone skins, which provide added protection against condensation and sun glare.
On another note, I really like this article. It has a lot of good information that I’ve added to my personal research. One thing I like about Abode is that the Chris Carney (a founder) has many years of experience in the security industry. It is open source and seems like it protects user data better. After Google purchased Nest, one can only imagine how they are combining all of that personal data with all of the other personal data they have on us. The on-demand monitoring seems really valuable–I only really need 3rd party monitoring when I’m out of town.
Pricing for add-on components is pretty much in line with what you'll pay if you have a SimpliSafe or Abode system. Extra contact sensors are $20 each, another motion sensor will cost you $30, and a range extender goes for $25. Additional devices including a Smoke/CO detector ($40), a Flood/Freeze detector ($35), and a Dome Siren ($30) are not yet available.
A Ring home security system can get pricey, as you need to pay upfront for the devices. The plans are straightforward, so you won’t run into any confusion there. The low monthly cost of the plans makes the premium features accessible for any budget, especially if you only have one or two Ring devices. The real question is whether Ring offers enough value compared to the other systems on the market. If you’re willing to take a more DIY approach with installation and you don’t mind a lack of home automation features, then the Ring is a contender.
With home and away modes, you're able to customize entry and exit delays up to two minutes before the alarm goes off, giving you enough time to leave the house after arming and enter the access code on the keypad upon returning home. When an event is detected, you'll get a notification on your phone, and the Ring app will display a countdown giving you the configured period of time to disarm the system before the alarm goes off. If you fail to enter the keypad code or disarm from the Ring app within the allowed time, the base station will emit a very loud beeping sound, and if you are signed up for professional monitoring, authorities will be notified.

As you set up each piece, you're able to give it a name (like Front Door, Office Window, Main Hallway, etc), and then a location of where it is in your home, as well. Within the app, the devices are grouped by type, and the names that you give each piece is displayed to help you know what is what. While setting up the keypad you'll be asked to create a PIN number that you'll use to engage and disengage. If you have additional family members, once you share the new equipment with them in the app, you can set PIN numbers for them as well.


Where abode Wins: abode offers free cloud storage, and they offer the widest range of equipment including glass break and flood sensors which are viewed as essential home security devices. Also, abode uses an open platform allowing more third-party integrations via Z-Wave and Zigbee backed by their CUE automation engine. It’s true that Ring offers Z-Wave and Zigbee too, but details on compatible products are still scarce. Fourth, abode has more home security experience than Nest and Ring.
Thinking of your situation only….More than likely, you will need to buy an additional piece of hardware to upgrade your wired system to support newer technology, but it’s hard to say without more details. You might want to look into a device called Konnected. This would allow you to integrate your wired system with SmartThings which supports Ring cameras. You can read about that here. In my situation, they are not integrated, although most major home security companies now work with at least some third-party devices like Ring, Amazon Alexa, Google Home, August, etc.

Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
What sets Nest Guard apart from the abode and Ring’s base station is its intuitive nature. First of all, the integrated keypad is a smart choice because let’s face it; phones get lost. In addition to a keypad which accepts a numeric passcode, Guard has several buttons. You can press a button to quickly swap between modes (alarm off, home and guarding, and away and guarding) or you can press for immediate help using the panic button which is found on the back of the device.
 We installed two new Floodlight Cams, one over the garage, and one in the backyard. Easy installation into existing Floodlight box. After installation, we had a problem connecting. We just call up support and they walk us through it within minutes. Great compliment to our Ring Video Doorbell Pro. We love it so much, our daughter got one, and we monitor their house too.
×