Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
New, unopened Ring Spotlight Cam wired uses motion sensing to detect intruders! Plug it in, and then it picks up movement, the spotlight turns on, and it begins recording in 1080p with infrared night vision and two-way audio. It connects to WiFi, allowing u to monitor surveillance straight from your phone! It also contains an alarm that u can activate if needed. It is weather resistant and the perfect device to keep your home safe!
The integration with Ring Alarm and upcoming Alexa support are important for Ring. When I tested the Ring Alarm, I lamented that the indoor $120 Amazon Cloud Cam home security camera didn't work with Ring Alarm -- and that the system as a whole didn't work with Alexa (something I'm still waiting for). And since there wasn't an indoor Ring security camera, you didn't really have any options for in-home monitoring.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
Regardless of which model you choose, it’s recommended you connect your Spotlight Cam to your Wi-Fi network before mounting it outside. (In the case of the non-wired Spotlight Cams, you’ll first need to charge the battery using the supplied micro-USB cable.) Once you add the camera to the Ring companion app, the camera’s voice prompts guide you through the connection process.
Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.
The biggest disadvantage to many IoT/smart systems is the lack of an API. They are closed source and in reality are designed to lock you in to their products and offerings. If you’re happy with only buying say Ring products for everything and areas that they don’t have an offering you can’t integrate other products in, then you stuck with only what they offer.
You can also disarm the system from the app, but in a break from convention, Ring does not offer a key fob for arming and disarming the system. Geofencing that would automatically arm and disarm when you leave and return isn’t supported either. Harris said those were conscious design decisions. “What it came to was security,” Harris said. People said ‘Hey, I want this to automatically disarm my security system when I get close.’ The question then becomes: How close? And is it really you with your phone? Or did someone pick it up at the park, find your address, drive to your house, and let themselves in?”
Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
Wow! I’m impressed that you read the whole thing. A mobile hotspot, right? I think they would all tell you that it’s possible, but not something they recommend. The signal isn’t going to be as reliable as connecting to a WiFi network. Arlo sells a 4G camera called Arlo Go, but it’s more expensive upfront and the monthly fee is higher as you’re paying for cellular connectivity.
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.
Although SimpliSafe's basic monitoring service goes for $14.99 per month for 24/7 monitoring, you have to pay an additional $10 more a month to control the system from your phone and to receive email and push notifications. Tack on another $4.99 per camera per month to record, download, and share video, and you're up to around $30 per month, which is three times what you'll pay for a Ring Protect Plus plan.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
You can set your system to “Away,” which means that all the sensors connected to the system are monitored for activity. “Home” mode means that all exterior and perimeter sensors are monitored, but not inside your home. “Disarmed” mode means that all monitoring is off, and is useful if you’re having a barbecue and people are coming in and out of the house frequently. You can change modes by hitting the corresponding button on the keypad and the access code you’ve created for the system.
Being a cautious optimist, I first followed the app instructions; this was a mistake. Unfortunately, the app instructions are incomplete and leave out important details. Next, I moved on to the included instruction manual where I learned that the first step of the installation process is to fully charge Spotlight’s battery. Unfortunately for me, it was too late for that. The app also skipped another essential step found in the instruction manual: mounting position.