Ring suggests that the motion detector should be placed in a location with a good view of a high-traffic area likely to be passed by any intruders, with the detector placed about seven feet off the floor. Motion detection sensitivity can be adjusted in the app if you find you're getting too many false alerts such as from a pet. The detector can be mounted using either adhesive or included screws that attach a bracket to the wall for easy removal of the detector itself.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.

I own and use 4 Ring devices at my primary and secondary home. Until last night, I have been very pleased with the product. Last night, we had a heavy storm at our second home and the electricity was off for a period of time. My Nest devices automatically reconnected to my wifi as soon as the power was reestablished; not so with the Ring devices. Ring required my to physically be close to the devices with my iPhone in hand to reestablish the connection. This is a serious flaw for users like myself and one that Ring needs to correct if I am going to continue using their product. The electricity, and thus the wifi, at our mountain home loses power several times a year. I don't want to travel 700 miles just to reconnect a Ring device or two.
×