The Ring Alarm system does not include fire or carbon monoxide monitoring – for those features, you’ll need to add a First Alert Z-Wave Smoke/CO alarm ($40) or Ring’s Alarm Smoke and CO listener ($35) that gets installed next to your existing smoke alarms and “hears” when they go off to trigger the system. I was not able to test these products for this review.
I know the doorbell works because I have a rule that runs on the doorbell. I know the alarm does not work with IFTTT. Now I’m questioning my assessment of the Spotlight. I can’t remember if I actually used an IFTTT recipe with it or just assumed there was one. I gave the camera to my dad so I’ll have him check and then update the article if needed. Thanks for the tip!
What happens if your home Wi-Fi goes out? Luckily, both the Ring and Nest systems offer cellular connectivity, so your alarm will stay online even if there’s a power outage or your Wi-Fi disconnects. Nest charges an additional $5 per month or $50 per year for cellular connectivity, while Ring offers the feature when you purchase the Protect Plus plan. Both systems also incorporate battery backup. While the Nest device will continue running for 12 hours without an external power source, the Ring will last for 24 hours.
Ring’s smart home security system does not include carbon monoxide monitoring. If you want to add this feature to your home, you can purchase either Ring’s Alarm Smoke and CO listener or First Alert’s Z-Wave Smoke/CO alarm. These are installed next to your current smoke alarms and will hear when either go off which triggers your security system and lets you know there is an emergency at home.
You can also mount the base station on a wall, and can connect to your wifi network, or you can connect directly to your router with a network cable. The Ring Alarm base station offers a 24-hour battery backup, plus it can connect to LTE if you have an outage, so you have a cellular option if needed; however, you do have to pay for it with a monthly subscription.
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
It doesn't work with the Amazon Cloud Cam indoor home security camera, either. Here's what a Ring spokesperson had to say about it: "Ring Alarm does not work with Amazon Cloud Cam at this time. While I can't comment on the roadmap at this time, what I can tell you is that we will make product decisions based on what will best empower Neighbors with an affordable, effective way to monitor their homes."
The big selling point here is the price: the system starts at $199, which is relatively cheap for a home security system. It only comes with a single motion sensor ($30 separately) and a single door / window sensor ($20 separately), so you’ll need to spend more to really outfit your home. But it’ll still come out to far less than many competitors’ systems. Nest, for instance, sells a similar system for $399.
For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).
It would have been convenient to have a device like a key fob for the Ring Alarm, as running to find the keypad or navigating the app to turn off the alarm takes a few seconds too long, but one does not currently exist. However, arming and disarming the system is relatively straightforward. I just had to dig through the paper manual to figure out how to correctly enter my PIN to change modes.
4) keypad- the nest system is if you dont have a table to lay the base station on as you come in the door. If you have a modern hosue or modern design you will prefer the flexibility to mount the keypad on the wall AND (VIP) use multiple keypads if you choose to enter through more than one door ! Nest allows for openly one keypad ! And also by putting kepayp[ad and base station in one chassis, you can't hide the base station OR locate it wher the mesh networks eorks best ! I understand nest keypad is a work of minimalist art.but Ring keypad is hardly ugly and very functional and flexible . It even lights up as you approach it and can be operated on batteries as well (ie you can take it with you to other parts of the house as needed !)
The Ring Alarm system comes with a base station, a keypad, an entry sensor, a motion sensor, and a Z-Wave range extender. Also included in the box are installation kits containing mounting tape and hardware for the keypad and the two sensors, an AC adapter for the base station, a USB power adapter and cable for the keypad, a getting started guide, and an alarm kit security basics guide.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
The Ring Alarm has the electronics required to do all of that now, and Harris said those features will be turned on at some point. “You’ll see all of those things,” he said. “We’ll support color-changing lights, so that in a smoke situation, the lights will turn to a darker color to make it easier to see at night. You’ll see door locks with [Z-Wave’s] S2 security that will disarm the security system when you use the keypad to unlock the door, because we know you’ve done that in a secure way.”
Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.