I got my new Ring security system yesterday and installed the panel, door sensor, and motion sensor yesterday. I have had a security system with a major national monitoring company for nearly six years. I am not new to this. I got the new Ring system to replace the current system I have due to the price of the monitoring. I like the idea of having $10 a month for all of my cameras and security system combined. By switching, I am able to save $55 a month by cancelling my previous monitoring from the companies that did so for my security system and cameras.
Would it be better than 1080p? Yes. Would it be good enough? I don’t know. I only tested the indoor IQ, not the outdoor. I didn’t think Supersight was that fabulous. Here’s a link to a section of my video that shows the Supersight in action (https://youtu.be/BIWchrX27fU?t=2m28s and also here https://youtu.be/BIWchrX27fU?t=56s). On the white table that’s on the right side of the frame, there are a few books stacked up. You can’t even read the titles on the bindings, but maybe a license plate would be different?
Setup of Ring Alarm is quite simple, and the whole process only took me about half an hour, although I used the included adhesive strips to mount sensors and didn't mount the base station and keypad to my walls, so it would have taken a bit longer if I'd gone all-in with hardware mounting options. I may yet do that once I've decided for sure where I want to put the various components.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.

For instance, you cannot use the contact or motion sensors to turn lights off and on, and the system doesn’t have the ability to adjust your smart thermostat when the system senses that you leave your home. The Ring Alarm system does use Z-Wave technology, which is a widely used standard with smart home devices; however, it doesn’t utilize this functionality as much as it could.


Being a cautious optimist, I first followed the app instructions; this was a mistake. Unfortunately, the app instructions are incomplete and leave out important details. Next, I moved on to the included instruction manual where I learned that the first step of the installation process is to fully charge Spotlight’s battery. Unfortunately for me, it was too late for that. The app also skipped another essential step found in the instruction manual: mounting position.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.
×