The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.
Unfortunately, though I purchased the Solar Panel version, the camera did not ship with Solar Panel installation instructions. The Solar Panel itself had an instruction pamphlet, but it’s picture book style, which is not my favorite. I decided to ignore all instructions and guess at the install, which wasn’t a good idea. After installation, the camera’s video feed kept flickering in and out (a problem which I have yet to resolve) so I went back through my install steps to see if I had messed up along the way. I had. I found Solar Panel installation instructions online which I recommend and followed step-by-step.
For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).
What sets Nest Guard apart from the abode and Ring’s base station is its intuitive nature. First of all, the integrated keypad is a smart choice because let’s face it; phones get lost. In addition to a keypad which accepts a numeric passcode, Guard has several buttons. You can press a button to quickly swap between modes (alarm off, home and guarding, and away and guarding) or you can press for immediate help using the panic button which is found on the back of the device.
Nest will intelligently alert you, within reason. For example, you can have the street set as a zone, but turn off notifications for the street. Nest can also tell you when it sees a person or thinks it sees a person. In fact, you can choose to only receive alerts when it sees a person, which virtually eliminates false alarms. Better still, you can turn on person detection for the entire frame or from select activity zones.
Spotlight Cam’s star feature is its light. The camera is equipped with two lights that automatically trigger when motion is detected. The lights aren’t very bright. At 700 lumens, they’re about as bright as a 60-watt light bulb. It’s not enough to scare someone away, but does improve the camera’s ability to see at night. And nighttime is the only time when the lights will automatically turn on, though you can turn the lights on manually at any time. When triggered, the light stays on for about 30 seconds. When turned on manually, it stays on until you end the live stream (required to access light feature).
A Ring home security system can get pricey, as you need to pay upfront for the devices. The plans are straightforward, so you won’t run into any confusion there. The low monthly cost of the plans makes the premium features accessible for any budget, especially if you only have one or two Ring devices. The real question is whether Ring offers enough value compared to the other systems on the market. If you’re willing to take a more DIY approach with installation and you don’t mind a lack of home automation features, then the Ring is a contender.
For a long time, I used my indoor Nest Cam to film through my window. It was a makeshift outdoor camera supplemented by my Ring Video Doorbell. So it should come as no surprise that when Nest Cam Outdoor launched, I jumped at the opportunity to buy it. Since then, my search for an outdoor solution has continued to Canary Flex, Ring Spotlight Cam, Arlo Pro, Arlo Pro 2, Blink XT, Nest Hello, Reolink Argus, Argus 2, and a few that did not make the honorable mention list.
Rose, thanks for the great review! Paul, I have a Video Doorbell Pro and a Floodlight Cam — both are hardwired. Both lag at least seven seconds behind real time and sometimes even longer. During the lag, the would-be burglar is gone or could be in your house. Ring’s ads suggest you see things in real time which is not the case for me. The signal strength and wifi speed both test excellent. I hope this helps you. Nick
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
As part of the Ring Protect Plus plan priced at $10 per month or $100 per year, you'll get 24/7 professional monitoring on your Ring Alarm. When your sensors trip and the base station sounds an alarm, after 30 seconds it also sends a signal to Ring's central monitoring system. A support agent will attempt to call you to see if everything is okay, and then tries your emergency contacts if you can't be reached.
Unlike the other options, Ring cameras don’t integrate with the security system. Sure you can monitor them all using a single mobile app, but there is no “if this, then that” relationship. If your alarm sounds, your cameras will not record. If your cameras detect motion, they won’t trigger your alarm. However, there is one major benefit to using Ring cameras: If you pay $10 per month, you will gain access to cloud storage and professional monitoring with cellular backup.
The most useful product offered by Nest that the Ring system does not have is a connected lock. This tamper‑proof, key‑free deadbolt connects to the Nest app, letting you lock and unlock your door remotely. Users can also create passcodes for family, guests and people they trust, or give them a Nest Tag programmed to let them in only at certain times of the day.
Ring's updated app (which will roll out to everyone in the coming weeks) brings lots of improvements for those invested in the ecosystem. You have quick and easy access from the main screen to the alarm features, as well as a glimpse of what your cameras are seeing. Things can be a little slow to load, depending how much equipment you have, but most of the time it works great.