Nest Cam Outdoor’s temperature range is limited to -4° to 104°F. In the same breath, the Nest team warns of placing the camera in direct sunlight to avoid overheating the device. So if the device can only handle 104° and it might heat up in the sun, is it really ready to live outside? Perhaps it’s not that the device isn’t ready to live outside, but that it’s more suited for temperate zones.

Ring's professional monitoring isthrough Rapid Response Monitoring Services, and it's one of the more affordable services available. For $10 a month (or $100 a year if paid up front), you get the benefits of dispatchers on standby, and this includes video storage for any Ring cameras you might have. There's no long-term contract, either, so you can cancel any time you don't need it through the Ring website.
You can place the keypad on a flat surface like a table or shelf, or you can mount it on the wall. Just remember that it needs a Micro USB cable for power, but that doesn’t mean it needs to be placed close to an outlet. Ring says its internal battery will last six to twelve months depending on usage. As a result, you could potentially place the keypad anywhere in your home and charge it every so often.
So far my experience with this system has been good. I am giving this product 5 stars because of the customer service experience I had when my alarm went off and the future potential I see for the whole Ring product line. However, I would like to see a couple things addressed. 1) The app needs to be easier to use, especially the cancel option, that cancel option should be there immediately and very easy to find. 2) With my old 42$ a month system I was able to control my lights, door lock and thermostat. Please please Mr. Siminoff, can we get this feature added to the system? I think adding in those features will take this from a very good low cost option to a GREAT overall option for security and home automation.

My indoor Canary is self-sufficient, and that is exactly what I want in a home security camera. Flex has yet to provide that same experience. I’ve had to physically interact with the device multiple times to get it to reconnect to my internet. Also, the geofencing feature is inaccurate, often marking me away while home and vice versa. As for power loss notifications? They’re hit or miss.


Ring’s Alarm, which is finally shipping to customers starting today, is the latest in these new, do-it-yourself home security systems. It’s most similar to the Secure system that Nest released last year, and uses a variety of motion, entryway, and fire / carbon monoxide sensors, along with Ring’s other home security cameras to monitor your home for emergencies and intrusions.
One final issue has more to do with software performance than hardware issues, but it’s important to point out. From time-to-time, the snapshot will record a little too late. In the example above, it caught the UPS man’s back. For those without a Nest Aware subscription, this is all you get. Those with a subscription can rewind footage to see the moments before the clip.
Ring also doesn't currently offer any additional security accessories, but it plans to add a leak sensor and other devices at some point. And while your Ring security cameras and video doorbells ($250 at Amazon) live in the same app as your Ring Alarm Security Kit, there aren't any direct integrations between them today. I'd like to see something like, "If the Ring Alarm Security Kit's front door sensor notices that the door is opened in Home or Away mode, then tell my Ring Video Doorbell Pro to record automatically" -- even if the Video Doorbell Pro itself hasn't detected motion yet. 
The safety and survival of your family will The safety and survival of your family will be your main concern in the event of a disaster. This carefully-stocked emergency kit contains packaged food and water to sustain a family of four for the critical first 72 hours of an emergency situation as well as water purification tablets a ...  More + Product Details Close
Installing Canary Flex was easy. Part of that comes from the fact that I’m a Canary indoor camera user. To add Canary Flex, I plugged it in (Even though it can be battery-powered, Canary recommends starting with a full charge.), turned my phone’s Bluetooth feature on, visited the app, and selected “Add Canary device”. From there, you confirm the physical location of your camera, tap the button on the back of the device, and it begins to pair.

Home security systems have been around for decades, providing a way to have your home monitored for intrusions and emergencies while you’re away or sleeping. But traditional home security systems have required professional installation, costly subscription plans, and long-term contracts that lock you in to the service. They’ve not been practical to move from home to home or for use in apartments.


Thx for the recommendations – probably was misleading on the wiring issue. The two camera locations will work well with a Ring/Nest outdoor camera as the power cords are short, easy and secure for both locations to outlets that are not used. However, a wired system to a recorder would be another story as wiring to a central recording area will be quite difficult (lots of attic/wall work as the cameras are on opposite sides of the house AND recorder must be well hidden in an indoor cabinet).
Aside from the app and the keypad, there isn’t currently another way to set the system. In comparison, Nest’s system can be set via key fobs, which are quicker and easier than punching in PIN codes or opening an app, or voice through the Google Assistant. Ring says that integration with Alexa will come down the road, but it is not available at this time.
The Ring Alarm system does not include fire or carbon monoxide monitoring – for those features, you’ll need to add a First Alert Z-Wave Smoke/CO alarm ($40) or Ring’s Alarm Smoke and CO listener ($35) that gets installed next to your existing smoke alarms and “hears” when they go off to trigger the system. I was not able to test these products for this review.
Regardless of which model you choose, it’s recommended you connect your Spotlight Cam to your Wi-Fi network before mounting it outside. (In the case of the non-wired Spotlight Cams, you’ll first need to charge the battery using the supplied micro-USB cable.) Once you add the camera to the Ring companion app, the camera’s voice prompts guide you through the connection process.

Being a cautious optimist, I first followed the app instructions; this was a mistake. Unfortunately, the app instructions are incomplete and leave out important details. Next, I moved on to the included instruction manual where I learned that the first step of the installation process is to fully charge Spotlight’s battery. Unfortunately for me, it was too late for that. The app also skipped another essential step found in the instruction manual: mounting position.

There are so many home security systems to choose from; how can you possibly narrow it down and choose just one? There are obviously pros and cons to each system, so you need to think about what’s important to you and what you most value in a home security system. There really isn’t too much known about the Ring security system just yet because it’s very new on the market. The company has made themselves known for their video doorbells, but is just starting to dabble in home security systems. You’ve probably seen the videos of attempted burglars and package stealers caught red handed with Ring doorbells. Clearly, this innovative product has worked well so far. What should you keep in mind, though, when looking at the Ring Security System?
The base station is also wall-mountable and can be installed on a Wi-Fi network or connected directly to your internet router over Ethernet. It has a 24-hour battery backup plus the ability to connect to an LTE network in the event of a power outage. (The LTE connectivity is available when you subscribe to Ring’s Protect Plus monitoring service and uses AT&T’s network.) Both the keypad and the base station feature colored LED rings to signify if the system is armed or disarmed and have built-in speakers to sound the alarm in the event of an emergency or intrusion.

I love the Ring Video Doorbell, but I’m not a huge fan of their other cameras. However, the wired version of Ring Spotlight works in temperatures ranging from -20°F to 120°F, which makes it an interesting choice for you. I also like my Nest Hello. Nest Cam IQ Outdoor can work in temperatures ranging from -40° to 113°F. That said, if you are opening to drilling during your construction project, which I assume you are, I would recommend exploring PoE cameras, which is a category I need to dig into more. If you go this route, you would more than likely have one app for your cameras and another for your doorbell. As a side note, Ring Video Doorbell Elite is a PoE option.
What happens if your home Wi-Fi goes out? Luckily, both the Ring and Nest systems offer cellular connectivity, so your alarm will stay online even if there’s a power outage or your Wi-Fi disconnects. Nest charges an additional $5 per month or $50 per year for cellular connectivity, while Ring offers the feature when you purchase the Protect Plus plan. Both systems also incorporate battery backup. While the Nest device will continue running for 12 hours without an external power source, the Ring will last for 24 hours.
You can also mount the base station on a wall, and can connect to your wifi network, or you can connect directly to your router with a network cable. The Ring Alarm base station offers a 24-hour battery backup, plus it can connect to LTE if you have an outage, so you have a cellular option if needed; however, you do have to pay for it with a monthly subscription.
The aesthetic result of two devices mounted and connected by a wire isn’t overly pleasing. Thankfully, my setup is installed in a spot where it isn’t publicly visible. If it were on my porch, I would probably return the solar panel to use two batteries. That’s right, two! During the install, I was most surprised to find that though Spotlight Cam ships with one battery, it has room for two.

All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”

Ring also sells several cameras including the Ring Video Doorbell, the Video Doorbell 2, Ring Elite, and Video Doorbell Pro. They also sell a Floodlight Cam, Spotlight Cam, and two versions of their Stick Up Cam. Most of the cameras are geared toward outdoor use with the exception of Stick Up Cam Wired and Stick Up Cam Battery. The two cameras can be used indoors or outdoors.
3) a brand with the best wifi connectivity record (I HATE when it loses connectivity), this is actually the most important thing to me – the wifi connectivity must be seamless, I’ve had terrible experience with bad wifi connectivity. I want to be able to pull out my phone anytime and instantly be able to see live video. zero tolerance for bad wifi connection:)
For the Ring Alarm to function properly, you'll need to subscribe to Ring's Protect Plus plan, which is $10 a month or $100 if you prepay for the year. It includes 24/7 professional monitoring, video recording, reviewing, and sharing for unlimited cameras, 10% off purchases made at Ring.com, and an extended warranty on all of your items as long as your subscribed.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
Using a Family Account, you can share access with nine other people. However, Nest’s sharing feature is problematically one-size-fits-all. All members will have full control over your account, including all cameras and connected devices such as thermostats and smoke alarms. As an example, I gave my family access to a camera placed at my grandmother’s. They can now view the camera at my grandmother’s and also the camera at my house. There is no way to limit their access. Also, they can’t set their own notification preferences, so they either have to put up with all the notifications from my house, or I have to turn off my notifications.
Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.

Thanks, Katie. I didn’t have major glare issues when facing Nest out of the window, but I could see the reflection of the camera from time to time. I had to position the camera just right, and sometimes, it would get knocked out of place which caused a glare or reflection. That said, there are so many factors that could play into this. My window looks onto a porch which could be a major factor, but also, Nest uses a different lens type than Arlo. Finally, if you have double pane windows, that will create a reflection as will positioning. The window I recorded through faces north.

The Ring Alarm Home Security System offers an easy and relatively affordable way to make sure your home is safe and secure. The system can be installed in as little as 20 minutes and can be self-monitored using your mobile device or desktop system. Or, you have it professionally monitored by subscribing to the very affordable Ring Protect Plus Plan, which also includes unlimited cloud storage for any Ring camera you may own.
The decision to separate the system’s brains—the base station—from the keypad is smart: It allows you to place the larger base station somewhere out of the way and put the smaller keypad near an entry door, where it’s easy to access. You can also deploy more than one keypad—one at the front door, one at the back, and one on your bedside table, for instance. Putting the base station somewhere other than near an entry door also enhances the system’s overall security: If burglars can’t find it quickly, they can’t disable the system.
After using Flex unplugged for a little over two weeks, the battery fell critically low before getting to the point where the camera would no longer turn on. I don’t blame this on the weather as much as I do the wind. Continued tests showed a battery life of 2-4 weeks. Per a reader request, I retested the camera in August. The weather is warmer here in August, it’s less windy, and Canary has since made several adjustments to help extend Flex’s battery life. This time, the battery lasted a full seven weeks.
The Ring app will automatically detect the rest of the items that came pre-packaged with the base station once its initial set up is complete. You'll need to pull plastic tabs on each piece so that they can power up, and you'll want to do this one at a time. If you pull all the tabs at the same time, the system tries to connect to multiple devices at once and slows down the setup process.

Third, Nest Guard has a voice. Of course, it’s no Google Home, but it will provide useful information. For example, when you arm your system, there is an arm delay which allows you to exit your home without setting off the alarm. Instead of an annoying beep that continues until the system arms, Nest Guard uses a friendly voice to tell you how much time you have left.
Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
Motion detection was responsive and accurate with the default settings, which placed the sensitivity midway on a scale between “people only” and “all motion.” You can adjust this to your liking with the slider, or use it in combination with customizable motion zones.  With each alert, Chime Pro simultaneously emitted a digital Ring. This ensured I was kept aware of detected activity even when I was home, as I don’t usually carry my phone around the house. You can change the chime’s sound and volume and “snooze” it for periods of time in the Ring app.
×